No. 02 · 159 parts · 11 plates
Log Cabin
A log cabin to print yourself and stack log by log. At the corners the notches interlock like in real log building.
€3.90 Download
also available printed: €65.99
Your choice: a print file (STL) for your own 3D printer – instant download – or ready-printed with shipping.
Images: 3D preview of the design
No. 01 · 1:24 plug-together kit – print files
Timber-Frame Cottage
- Instant download (ZIP, 23 MB)
- Plugged together, no glue
- 105 parts · 13 plates
- Secure payment via PayPal or Stripe
- No customer account needed
- Pay with PayPal, card, Apple Pay, Google Pay, Klarna
- Shipping included (Germany only)
4.75 – 2 pieces of feedback on the shop (not verified)
Timber-frame house with shutters, chimney and sleeping loft to print yourself: 105 parts on 13 print plates, printed without supports, assembled without glue.
In the download
- 13 print plates as STL, sorted by color
- All 105 parts individually as STL for reprinting
- Fit test (block with 5 holes and a pin)
- Assembly guide with print settings, to print out (German)
- Scale
- 1:24
- Parts
- 105
- Print plates
- 13, max. 190 × 190 mm each
- Supports
- none
- Finished model
- 15.2 × 12.2 cm, 16.5 cm tall
- Format
- STL
The kit
You get all parts as STL – once pre-arranged on 13 print plates sorted by color, and once individually for reprints. Each plate prints in one color, so a single-color printer is enough. No part needs supports.
Assembly needs no glue: the walls slide into the grooves of the four corner posts with wedge tongues, the timber framing sits in the wall with square pegs, and two barge boards hold the roof together. Nothing gets painted, the color comes from the filament.
The inside is fully furnished – fireplace with kettle and flames, kitchen unit with water pump, table and two chairs, a cupboard and a sleeping loft reached by a ladder. Lift off the roof to look inside.
Print notes included in German; part names are self-explanatory.
What moves
- Front door
- 3 windows with two sashes each
- 6 shutters that open and close
- Removable roof
You will need
- 3D printer with 0.4 mm nozzle and a bed of at least 190 × 190 mm
- Filament in 7 colors, about 630 g in total – transparent for the window panes is optional
Printing
- Nozzle
- 0.4 mm
- Layer height
- 0.12–0.16 mm for roof, parquet, furniture, windows and all small parts – otherwise roof tiles, joints, hearts and the fine pegs get lost. 0.2 mm is fine for walls, base and timber framing.
- Infill
- 15 %
- Supports
- none – every part is already oriented correctly in the files
- Tips
- A brim helps with the small black parts. No light brown filament? Then print parquet, sleeping loft and countertop in dark brown.
Filament & parts
One plate, one color. Nothing gets painted.
White 3 plates · approx. 190 g · 21 parts
4 walls, 6 window frames, 6 window sashes, mattress, pillow, jug, 2 cups
Dark brown 3 plates · approx. 130 g · 32 parts
Timber framing for all four sides, 4 corner posts, 2 barge boards, 4 ceiling beams, door, wardrobe, kitchen cabinet, ladder, railing, table, 2 chairs, 3 flower boxes, bench, wall shelf, rain barrel, chest, stool, log pile, firewood
Gray 1 plate · approx. 170 g · 4 parts
Stone base, fireplace with chimney, door step, sink
Light brown 1 plate · approx. 40 g · 3 parts
Herringbone parquet, sleeping loft, countertop
Brick red 2 plates · approx. 90 g · 7 parts
2 roof halves, ridge tiles, flames, flower pot, bedspread, rug
Green 1 plate · a few grams · 10 parts
6 shutters, 3 × flowers for the boxes, potted plant
Black 1 plate · a few grams · 19 parts
12 shutter hooks, 2 door hinges, door handle, wall lantern, table lantern, kettle, water pump
Transparent 1 plate · optional · 9 parts
9 window panes
Notes
- Pegs and slots are built for 0.20 mm clearance per side, set more generously than before after test prints so nothing needs trimming. The included fit test shows whether that suits your printer.
- The finished model has many very small parts and is not a toy.
- The files are for your private use – print them as often as you like. You may not pass on, upload or sell the files themselves.
Customer voices
Reviews
Loading reviews …
Bought the model? Rate it now
Keep browsing
The other houses
No. 03 · 110 parts · 14 plates
Swedish House
Red wooden house to print yourself, prepared for seven lamps. The wires disappear into wall grooves, the battery into a drawer in the base.
€4.90 Download
also available printed: €70.99
No. 06 · 84 parts · 12 plates
Water Mill
A stone mill to print yourself in which something moves: turn the water wheel outside and the millstone inside turns with it, via a printed pin gear.
€4.90 Download
also available printed: €63.99