Skip to content
Steckwerk Account Cart 0

Your choice: a print file (STL) for your own 3D printer – instant download – or ready-printed with shipping.

Swedish house on a wooden table
  • Image 1: Swedish house on a wooden table
  • Image 2: Swedish house by day: red cladding, white corners, green door, dark roof
  • Image 3: Swedish house in the evening with glowing windows and a lantern above the door
  • Image 4: Overview of the print plates of the Swedish house, sorted by color
  • Image 5: See-through view of the house: the wire routes glow orange
  • Image 6: Hollow base with ribs, cable channels and the battery drawer pulled out
  • Image 7: Top view into the lit Swedish house without roof
  • Image 8: Lit sleeping loft with reading lamp, seen from above

Images: 3D preview of the design

No. 03 · 1:24 plug-together kit with lights – print files

Swedish House

  • Instant download (ZIP, 24 MB)
  • Plugged together, no glue
  • 110 parts · 14 plates
How would you like the model?

€4.90

Instant download · ZIP, 24 MB · No VAT charged pursuant to § 19 UStG

  • Secure payment via PayPal or Stripe
  • No customer account needed
  • Pay with PayPal, card, Apple Pay, Google Pay, Klarna

4.75 – 2 pieces of feedback on the shop (not verified)

Red wooden house to print yourself, prepared for seven lamps. The wires disappear into wall grooves, the battery into a drawer in the base.

In the download

  • 14 print plates as STL, sorted by color
  • All 110 parts individually as STL for reprinting
  • Fit test (block with 5 holes and a pin)
  • Assembly guide with print settings, wiring diagram and shopping list for the electronics (German)
Scale
1:24
Parts
110
Print plates
14, max. 190 × 190 mm each
Supports
none
Finished model
approx. 16 × 14 cm, 21.5 cm tall
Lamps
7, wires hidden

The kit

You get all parts as STL – pre-arranged on 14 print plates by color and individually as well. No part needs supports, a single-color printer is enough.

The house is built for seven micro LEDs: two hanging lamps, an outdoor lantern, a bedside reading lamp, a floor lamp, a window lamp and the glow in the tiled stove. All wires are hidden – in grooves under the red cladding, on top of the ceiling beams and in the hollow base down to the battery drawer on the gable side.

It assembles without glue. Inside you find a tiled stove, a kitchen sofa, a Mora clock, a dining table and a kitchen unit, with the sleeping loft above. Even without electronics the house is complete – the lamps just will not light up.

View assembly guide (German)

Print notes included in German; part names are self-explanatory.

What moves

  • Front door
  • 6 casement windows
  • Battery drawer in the base
  • Removable roof

You will need

  • 3D printer with 0.4 mm nozzle and a bed of at least 190 × 190 mm
  • Filament in 6 colors, about 380 g in total – transparent for the window panes is optional
  • For the light: 7 pre-wired micro LEDs, a 9 V battery holder with switch and 2 clips (shopping list in the guide)

Printing

Nozzle
0,4 mm
Layer height
0.12–0.16 mm for walls, cladding, roof, lamps and furniture – otherwise trim strips, tiles and slots disappear. The base may use 0.2 mm.
Infill
15 %
Supports
none – every part is already oriented correctly in the files
Tip
Print the lampshades in white, not transparent: white PLA glows nicely warm when the LED is on.

Filament & parts

One plate, one color. Nothing gets painted.

  • White 4 plates · approx. 170 g · 58 parts

    4 walls, 4 corner boards, 2 barge boards, chimney, 9 trim frames, 8 window frames, 12 window sashes, 2 brackets, kitchen sofa, tiled stove, Mora clock, kitchen cabinet, table, 2 chairs, mattress, pillow, jug, 2 cups, 4 lampshades

  • Swedish red 3 plates · approx. 40 g · 10 parts

    4 cladding panels, bedspread, sofa cushion, dining-table hanging lamp, window lamp, Dala horse, flower pot

  • Black 2 plates · approx. 50 g · 9 parts

    2 roof halves, ridge tiles, chimney cap, porch roof, outdoor lantern, floor lamp, wall arm, door handle

  • Light brown 2 plates · approx. 30 g · 12 parts

    Plank floor, sleeping loft, 5 ceiling beams, ladder, railing, countertop, chest, side table

  • Gray 1 plate · approx. 90 g · 4 parts

    Stone base (hollow, with cable space), battery drawer, stairs, sink

  • Green 1 plate · a few grams · 3 parts

    Door, rag rug, potted plant

  • Transparent 1 plate · optional · 14 parts

    14 window panes

Notes

  • Pegs and slots are built for 0.20 mm clearance per side, set more generously than before after test prints so nothing needs trimming. The included fit test shows whether that suits your printer.
  • The finished model has many very small parts and is not a toy.
  • The files are for your private use – print them as often as you like. You may not pass on, upload or sell the files themselves.

Customer voices

Reviews

Loading reviews …

Bought the model? Rate it now

Only people who bought this model can review it. For that you need the transaction code from your PayPal receipt; if you bought on this device, it is already filled in. The code is only checked and never shown.

Stars

Keep browsing

The other houses

Timber-frame cottage on a wooden table

No. 01 · 105 parts · 13 plates

Timber-Frame Cottage

Timber-frame house with shutters, chimney and sleeping loft to print yourself: 105 parts on 13 print plates, printed without supports, assembled without glue.

€3.90 Download

also available printed: €65.99

Log cabin on a wooden table

No. 02 · 159 parts · 11 plates

Log Cabin

A log cabin to print yourself and stack log by log. At the corners the notches interlock like in real log building.

€3.90 Download

also available printed: €65.99

Water mill on a wooden table

No. 06 · 84 parts · 12 plates

Water Mill

A stone mill to print yourself in which something moves: turn the water wheel outside and the millstone inside turns with it, via a printed pin gear.

€4.90 Download

also available printed: €63.99