Skip to content
Steckwerk Account Cart 0

Your choice: a print file (STL) for your own 3D printer – instant download – or ready-printed with shipping.

The horn sleigh with the tray on
  • Image 1: The horn sleigh with the tray on
  • Image 2: Runners, struts, slats and tray individually

Images: 3D preview of the design

No. 54 · Sleigh with a basket for sweets and small things, 160 mm, 4 files – print files

Horn Sleigh with Tray

  • Instant download (ZIP, 929 kB)
  • 4 files
How would you like the model?

€2.50

Instant download · ZIP, 929 kB · No VAT charged pursuant to § 19 UStG

  • Secure payment via PayPal or Stripe
  • No customer account needed
  • Pay with PayPal, card, Apple Pay, Google Pay, Klarna

4.75 – 2 pieces of feedback on the shop (not verified)

A horn sleigh with two curved runners, two cross struts and a choice of two tops: a slatted seat or a tray for wrapped sweets, wrapped nuts and small things.

In the download

  • STL files: Kufen_2x (2 runners), Streben_2x (2 struts), Latten_4x (4 slats), Schale
Length
160 mm
Width
66 mm
Height with tray
61 mm, without tray 54 mm (to the top of the horn)
Tray
106 × 66 × 35 mm, wall 2.0 mm
Runners
160 × 54 mm, 5 mm thick (2 pieces, file with both)
Slats
70 × 16 × 3.6 mm (4 pieces, alternative to the tray)
Largest part on the print bed
runners, 160 × 117 mm (both side by side)
Material volume
approx. 72 cm³ with tray (calculated as solid), approx. 87 cm³ for all files

The model

The tray (106 × 66 × 35 mm, wall 2.0 mm, floor 3.6 mm) is placed on the four peg pairs of the supports instead of the slats; its floor holes have 0.2 mm clearance per side. The long sides carry eleven vertical plank joints (0.9 mm wide, 0.6 mm deep), and each end wall has a cut-out star (Ø 16 mm). The top edge is rounded.

Each runner is a flat part with a horn scroll and four supports with wedge tenons (4.2 × 3.0 mm). The two cross struts have end pegs of 4.0 × 4.0 mm for the first and last support. If you do not want a tray, you plug on the four slats; both are in the package.

View print notes (German)

Print notes included in German; part names are self-explanatory.

You will need

  • 3D printer, print area of at least 170 × 130 mm
  • Filament in red, green and wood tone

Printing

Orientation
runners on their side, struts and slats flat, tray upright on its floor
Supports
none
Colors
runners red, struts and slats wood tone, tray green (suggestion)

Notes

  • Only put in sweets and nuts if they are wrapped; the plastic is not tested as food safe. Not a drinking vessel.
  • The files are for your private use – print them as often as you like. You may not pass on, upload or sell the files themselves.

Customer voices

Reviews

Loading reviews …

Bought the model? Rate it now

Only people who bought this model can review it. For that you need the transaction code from your PayPal receipt; if you bought on this device, it is already filled in. The code is only checked and never shown.

Stars

Keep browsing

More kits

Timber-frame cottage on a wooden table

No. 01 · 105 parts · 13 plates

Timber-Frame Cottage

Timber-frame house with shutters, chimney and sleeping loft to print yourself: 105 parts on 13 print plates, printed without supports, assembled without glue.

€3.90 Download

also available printed: €65.99

Log cabin on a wooden table

No. 02 · 159 parts · 11 plates

Log Cabin

A log cabin to print yourself and stack log by log. At the corners the notches interlock like in real log building.

€3.90 Download

also available printed: €65.99

Swedish house on a wooden table

No. 03 · 110 parts · 14 plates

Swedish House

Red wooden house to print yourself, prepared for seven lamps. The wires disappear into wall grooves, the battery into a drawer in the base.

€4.90 Download

also available printed: €70.99