Old Village Smithy

What moves

• Workshop door with two leaves, opens all the way to the wall
• 2 windows with two sashes each
• 4 shutters that open and close
• Grindstone turns on the crank
• Removable roof

You will need

• 3D printer with 0.4 mm nozzle and a bed of at least 190 × 190 mm
• Filament in 7 colors, about 880 g in total solid-calculated, clearly less with 15 % infill – transparent for panes and water is optional

Printing

Nozzle

0.4 mm

Layer height

0.12–0.16 mm for roof, porch roof, brick floor, windows, door and all small parts – otherwise tiles, joints and the fine pegs get lost. 0.2 mm is fine for base, paving, walls, pillars and forge.

Infill

15 %

Supports

none – every part is already oriented correctly in the files

Tips

A brim helps with the small black parts. If the smithy is to stand outdoors, use PETG or ASA. No light brown filament? Then print these parts in dark brown.

Filament & parts

One plate, one color. Nothing gets painted.

• Gray 3 plates · approx. 560 g · 14 parts

  Stone base, paving for the farrier bay, 4 walls, 4 corner pillars, forge with hood, chimney cap, door ramp, grindstone

• Brick red 2 plates · approx. 190 g · 7 parts

  2 roof halves, ridge tiles, porch roof, brick floor, embers with flames, glowing horseshoe

• Dark brown 2 plates · approx. 70 g · 22 parts

  Timber framing for both gables, 2 barge boards, 3 ceiling beams, 2 door leaves, porch roof timbers, 2 posts, tie beam, 2 brackets, cover strip, workbench, bellows, quenching trough, coal box, grindstone frame, stool

• White 1 plate · approx. 40 g · 10 parts

  2 gables, 4 window frames, 4 window sashes

• Light brown 1 plate · approx. 15 g · 7 parts

  Workbench top, wall shelf, cart wheel, bench, log pile, anvil block, bellows frame

• Black 1 plate · a few grams · 26 parts

  Anvil, vise, tools for the wall shelf, crank axle, coal, bucket, wall lantern, horseshoe for the door, 4 door pintles, 4 door straps, 2 door handles, 8 pintles for the shutters

• Green 1 plate · a few grams · 4 parts

  4 shutters

• Transparent 1 plate · optional · 7 parts

  6 window panes, water for the quenching trough

Notes

• Pegs and slots are built for 0.20 mm clearance per side, set more generously than before after test prints so nothing needs trimming. The included fit test shows whether that suits your printer.
• The finished model has many very small parts and is not a toy.
• The files are for your private use – print them as often as you like. You may not pass on, upload or sell the files themselves.