Country Railway Station

What moves

• 2 waiting-room doors (platform and street)
• Luggage doors with two leaves
• 5 windows with two sashes each
• Removable roof

You will need

• 3D printer with 0.4 mm nozzle and a bed of at least 190 × 190 mm
• Filament in 8 colors, about 820 g in total (calculated from the volume; with 15 % infill it is less) – transparent for the window panes is optional

Printing

Nozzle

0.4 mm

Layer height

0.12–0.16 mm for roof, floors, windows, doors, signs, clock, furniture and all small parts – otherwise slate, joints, lettering and the fine pegs get lost. 0.2 mm is fine for base, walls, brick bands and the wooden parts of the canopy.

Infill

15 %

Supports

none – every part is already oriented correctly in the files

Material

For outdoors use PETG or ASA; PLA warps in the sun.

Tips

The base prints upside down, with the paving of the platform on the print bed. A brim helps with the small anthracite parts. No dark brown filament? Then print these six parts in light brown.

Filament & parts

One plate, one color. Nothing gets painted.

• Gray 1 plate · approx. 240 g · 4 parts

  Base with platform, steps, 2 milk churns

• Ocher yellow 3 plates · approx. 200 g · 5 parts

  4 walls, mailbox

• Anthracite 2 plates · approx. 150 g · 20 parts

  2 roof halves, ridge cap, platform canopy, 2 sign boards, clock housing, lantern post, lantern head, stove, luggage scales, 2 cart wheels, 4 door handles, coal bucket, desk lamp, stamp pad

• Brick red 3 plates · approx. 70 g · 12 parts

  Brick bands for all four sides, 4 corner pilasters, waiting-room tile floor, chimney, small suitcase, ledger

• White 1 plate · approx. 70 g · 23 parts

  2 partition walls, 7 window frames, 10 window sashes, 2 lettering plates, clock face, timetable

• Dark green 2 plates · approx. 45 g · 20 parts

  4 platform posts, purlin, 4 rafters, fascia board, 2 barge boards, 2 doors, 2 gate leaves, platform bench, luggage cart, 2 potted plants

• Light brown 1 plate · approx. 30 g · 9 parts

  Plank floors for luggage room and ticket office, 2 waiting benches, counter window, counter, crate, tall suitcase, sack

• Dark brown 1 plate · approx. 15 g · 6 parts

  Ticket cabinet, file shelf, chair, large suitcase, 2 flower tubs

• Transparent 1 plate · optional · 12 parts

  12 window panes

Notes

• Pegs and slots are built for 0.20 mm clearance per side, set more generously than before after test prints so nothing needs trimming. The included fit test shows whether that suits your printer.
• The finished model has many very small parts and is not a toy.
• The files are for your private use – print them as often as you like. You may not pass on, upload or sell the files themselves.