Skip to content
Steckwerk Account Cart 0

Your choice: a print file (STL) for your own 3D printer – instant download – or ready-printed with shipping.

Three coasters on the table, the fourth lies in the holder
  • Image 1: Three coasters on the table, the fourth lies in the holder
  • Image 2: A glass of tea stands on the light blue coaster, the other three are in the holder
  • Image 3: All four coasters and the holder from above

Images: 3D preview of the design

No. 85 · Four two-color coasters Ø 95 mm, every flake different – print files

Snowflake Coasters (4 pieces) with Holder

  • Instant download (ZIP, 2 MB)
  • 21 files + color change list
How would you like the model?

€2.50

Instant download · ZIP, 2 MB · No VAT charged pursuant to § 19 UStG

  • Secure payment via PayPal or Stripe
  • No customer account needed
  • Pay with PayPal, card, Apple Pay, Google Pay, Klarna

4.75 – 2 pieces of feedback on the shop (not verified)

Four round coasters of 95 mm diameter, each with a different white snowflake on a colored base (light blue, dark green, red, gray). Plus a holder in which all four stand stacked.

In the download

  • Untersetzer_Klassik / _Stern / _Farn / _Kristall: each _komplett.stl plus base and white as single files
  • Folder buendig: per coaster base and inlaid flake (for multicolor printers only)
  • Halter.stl
  • farbwechsel.txt
Coaster
Ø 95 mm, 4 mm high, 4 pieces
Flake
0.6 mm raised, webs from 2 mm wide
Rim
2.4 mm wide, 1.0 mm raised
Holder
Ø 101.4 mm, 20.4 mm high, for 4 coasters
Clearance in the holder
0.6 mm all around
Format
STL, 21 files

The model

The four flakes are called Classic (six arms with branches), Star (diamonds at the tips, hexagon in the middle), Fern (many short branches) and Crystal (two hexagon rings). Each flake stands 0.6 mm above the base, the rim is 2.4 mm wide and raised 1.0 mm. The glass stands on the flake, which covers about a quarter of the inner area; condensation collects in the lower base and stays within the rim.

Printing needs a single color change: base up to 3.0 mm height in the color, then flake and rim in white. For multicolor printers every color is available as its own file, plus a flush version in which the flake is inlaid 0.6 mm deep and the surface stays even.

The holder has a floor with a finger hole and three wall arches with diamond cut-outs. Inside it is 96.2 mm wide, so the coasters have 0.6 mm of clearance all around. Between the arches there is room to grip the stack.

View print notes (German)

Print notes included in German; part names are self-explanatory.

You will need

  • 3D printer with a print area of at least 105 × 105 mm
  • Filament in white and up to four base colors

Printing

Orientation
flat, as the parts lie in the files
Supports
none
Color change (one nozzle)
once, at 3.0 mm height from the base color to white
Colors
light blue, dark green, red, gray and white; holder in white
Print area
from 105 × 105 mm

Notes

  • PETG copes better with hot cups than PLA. Do not put them in the dishwasher.
  • The files are for your private use – print them as often as you like. You may not pass on, upload or sell the files themselves.

Customer voices

Reviews

Loading reviews …

Bought the model? Rate it now

Only people who bought this model can review it. For that you need the transaction code from your PayPal receipt; if you bought on this device, it is already filled in. The code is only checked and never shown.

Stars

Keep browsing

More kits

Timber-frame cottage on a wooden table

No. 01 · 105 parts · 13 plates

Timber-Frame Cottage

Timber-frame house with shutters, chimney and sleeping loft to print yourself: 105 parts on 13 print plates, printed without supports, assembled without glue.

€3.90 Download

also available printed: €65.99

Log cabin on a wooden table

No. 02 · 159 parts · 11 plates

Log Cabin

A log cabin to print yourself and stack log by log. At the corners the notches interlock like in real log building.

€3.90 Download

also available printed: €65.99

Swedish house on a wooden table

No. 03 · 110 parts · 14 plates

Swedish House

Red wooden house to print yourself, prepared for seven lamps. The wires disappear into wall grooves, the battery into a drawer in the base.

€4.90 Download

also available printed: €70.99